Trade Copier for MT4, MT5 and cTrader
Replicate your trades on multiple trading accounts automatically
A trade copier copies every trade from one trading account to your other accounts automatically. Social Trade Hub's Trade Copier works on MT4, MT5, cTrader, TradeLocker, MatchTrader, Binance, Bybit and Kraken, with its own lot ratio and risk rules for each receiving account. It runs online, with no VPS.
How It Works
A powerful system that copies every action from your sender account to all your receivers in real-time
All Trader Actions Supported
Every action on your sender account is automatically replicated on all receiver accounts
Risk Management Modes
Choose how lot sizes are calculated for each receiver account
Follow Sender Lots
Copy the exact lot size from sender with an optional multiplier (x0.5, x1, x2, etc.).
Fixed Lots
Use a fixed lot size for all trades on the receiver, regardless of sender's lot size.
By Balance Ratio
Calculate lots based on the balance ratio between sender and receiver accounts.
By Equity Ratio
Calculate lots based on the equity ratio between sender and receiver accounts.
Risk Percentage
Risk a percentage of your balance per trade. Requires SL to calculate position size.
Per Symbol Settings
Configure different lot sizes for each symbol. Full control over your exposure.
Master Account Dashboard
Monitor every trade from your master account and track how each receiver copies it in real time.
Compatible Platforms
Works with all major trading platforms and brokers
A trade copier replicates every position from one trading account onto one or several others, automatically and in real time. You open a trade on your master account, and the same trade appears on every connected account within milliseconds, sized according to rules you control.
Social Trade Hub copies trades across MetaTrader 4, MetaTrader 5, cTrader, TradeLocker, MatchTrader and the major crypto exchanges, with execution between 2 and 8 milliseconds and no VPS to rent or maintain.
How a trade copier works
Every copier setup is built from three components. Understanding them separates a configuration that protects your capital from one that destroys it.
The master account
The master account is your source. Every position opened, modified or closed there becomes an instruction sent to the system.
A master can be an account you trade yourself, an account belonging to a strategy you follow, or a prop firm account whose positions you want mirrored onto a personal one. The copier does not care which, as long as it has read access to the account's activity.
One master can feed any number of receivers simultaneously, and you can run several masters in parallel if you follow more than one strategy.
The receiver accounts
Receiver accounts apply the incoming instructions. They can sit with different brokers, hold different balances, operate in different base currencies and run under different leverage caps.
That flexibility is the point. Most traders do not hold every account at one broker, and forcing them to would defeat the purpose of an independent copier.
The practical consequence is that receivers never match the master exactly. Different spreads, different execution and different swap rates produce divergence over time. That divergence is structural rather than a malfunction.
The copy rules
Copy rules determine how a master position translates into a receiver position. This is where most of the damage happens when configured badly.
The rules cover lot sizing, maximum exposure, which instruments to include or exclude, whether to copy pending orders and what happens when the receiver cannot execute.
A worked example makes the stakes concrete. A master account holding 100,000 units opens 1 lot, representing roughly 1% of its equity at risk. Copy that position at fixed lot onto a 5,000 unit receiver, and the same trade now represents 20% of that account. Four consecutive losses end it.
That outcome is not a software failure. It is a configuration choice, and it is entirely preventable.
Sizing methods and when to use each
Four approaches exist. Choosing correctly matters more than any other setting on this page.
Fixed lot
The receiver opens the same volume as the master, regardless of balance.
Use it when your accounts hold comparable equity and run under the same leverage. Two accounts of similar size at the same broker is the clean case.
Avoid it when balances differ meaningfully, which is most of the time. Fixed lot copying between accounts of different sizes is the single most common cause of blown receiver accounts.
Multiplier
The receiver opens a defined ratio of the master's volume. A 0.5 multiplier halves every incoming position, a 2.0 multiplier doubles it.
Use it when you know your account is consistently a given fraction of the master and both balances move together. It gives you direct control over exposure.
Watch for balance drift. If your account grows and the master's does not, your fixed multiplier gradually under-risks. If the reverse happens, it over-risks. Review the setting periodically rather than setting it once and forgetting.
Balance proportional
The receiver scales automatically according to the equity ratio between master and receiver.
If the master holds 100,000 and you hold 10,000, a 1-lot master position becomes 0.1 lots on your account. As either balance changes, the ratio adjusts without intervention.
This is the default we recommend. It keeps your risk constant through drawdowns and growth, which is precisely what fixed lot and multiplier fail to do.
Risk percentage
Rather than scaling the master's volume, the receiver calculates its own position size from the stop loss distance and a risk percentage you define.
A 1% risk setting with a 50-pip stop produces a different lot size than the same setting with a 20-pip stop, which is how position sizing should work.
Use it when you want exposure defined by your own rules rather than inherited from the master. It requires the source to set a stop loss, since without one there is no distance to calculate from.
What gets copied
A copier handling only the entry is incomplete. Positions change after they open, and those changes matter as much as the original trade.
Order types
Market orders execute immediately on the receiver at the best available price.
Pending orders, including buy limit, sell limit, buy stop and sell stop, transfer with their trigger price intact. They sit on the receiver until the market reaches them, exactly as on the master.
Expiry times on pending orders replicate, so an order cancelling on the master cancels on the receiver.
Stop loss and take profit
Both levels copy with the position and update when modified.
This is where weaker copiers fail. A master moving a stop to breakeven after 20 pips expects that change to propagate. If it does not, the receiver still carries the original risk while the master sits protected.
Our system tracks modifications continuously rather than copying once at entry.
Partial closes
When a master closes part of a position, receivers close the same proportion rather than the same volume.
A master closing 0.5 lots of a 1-lot position triggers a 50% close on every receiver, whatever their individual size. Copying the absolute volume would close entire receiver positions prematurely.
Trailing stops
Trailing stops applied on the master propagate to receivers, with the trail distance scaled where appropriate.
Symbol mapping
Brokers name the same instrument differently. EURUSD, EURUSD.m, EURUSDpro, EURUSD_raw, EURUSD-ECN and EUR/USD all describe one market.
A copier unable to resolve these fails silently, rejecting trades that look perfectly valid. The symptom is a receiver that copies some instruments and not others, which traders frequently misdiagnose as a connection problem.
Our mapping resolves prefixes, suffixes and separator variations automatically. Where an instrument genuinely does not exist on the receiver broker, the signal is skipped and logged rather than failing without explanation.
Execution speed and why it decides your results
Latency between master execution and receiver execution sits between 2 and 8 milliseconds on our infrastructure.
Where the cost of delay appears
The mechanism is slippage. The longer the gap between the master filling and the receiver filling, the further the price drifts.
On a strategy targeting 50 pips, a few pips of slippage is noise. On a scalping strategy targeting 5 pips, the same slippage removes the entire edge. A 300-millisecond delay on a fast-moving pair during a news release can produce a fill several pips from the master's.
This is why published latency matters, and why a platform declining to publish a figure usually has a reason.
Server-side execution versus VPS
Most trade copiers on MetaTrader run as an expert advisor, a program executing inside the terminal.
That architecture creates three recurring problems.
It requires MetaTrader to stay open permanently, which means renting a VPS, configuring it and maintaining it. A monthly cost on top of your subscription, and a task you own.
It fails silently. When the VPS reboots after an update, when the terminal disconnects, or when the broker drops the session, copying stops with no notification. Traders typically discover this days later.
It adds latency, since every instruction travels from master to VPS to broker rather than directly.
Our copier runs server-side on infrastructure we operate, with uptime measured at 99.9%. Nothing to install, nothing to keep awake, no VPS invoice.
Risk controls beyond sizing
Sizing handles the normal case. These settings handle the abnormal one.
Maximum lot cap overrides any incoming position above a volume you define, protecting you from a master error or a fat-finger trade.
Maximum concurrent positions limits how many trades stay open simultaneously, preventing a master opening twelve positions in an hour from consuming your entire margin.
Daily loss limit pauses execution once your account crosses a threshold, containing a master's catastrophic day rather than letting it run to conclusion.
Instrument filters restrict copying to symbols you choose. Useful when a master trades exotic pairs whose spreads at your broker make the strategy unprofitable for you even when it works for them.
Trading hours limit execution to defined sessions. A strategy built for the London open frequently underperforms when copied through the Asian session.
Equity stop disconnects a receiver entirely below a balance floor you set.
Configure these before enabling live copying. Every one exists because someone learned the lesson expensively.
Who uses a trade copier
Four situations cover almost every account on our platform.
Traders running multiple accounts
The most common case. You hold two, three or ten accounts and want one decision applied across all of them rather than repeated manually with slightly different sizing each time.
Manual replication introduces delay and error. By the time you have opened the fifth position, the price has moved from where the first one filled.
Signal providers
You trade an account, and subscribers connect theirs as receivers.
Your execution becomes their execution without you touching their platforms, their brokers or their funds. Each subscriber sets their own risk parameters, which means one strategy serves accounts of very different sizes.
Note that distributing trades to third parties carries regulatory implications. ESMA and the FCA classify automated execution of a provider's trades on a client account as portfolio management, which requires authorisation. Check your obligations before operating commercially.
Prop firm traders
You run a funded account and want positions mirrored onto a personal account, or the reverse.
Read your prop firm's rules first. Copying your own trades between your own accounts is often permitted within a total capital limit. Copying third-party signals or another person's account is frequently prohibited. Some firms ban cloud-based copiers specifically, regardless of source.
Prop firms compare entries, exits, lot sizes and timing across accounts, and they detect copying reasonably well. A violation generally costs the funded account and the fee paid for it.
Account managers
You run a strategy and apply it across client accounts, each with its own balance and risk tolerance.
Balance proportional sizing handles the differences automatically, and per-account risk settings let you run a conservative client alongside an aggressive one from the same master.
Setting up in practice
Connect your master account. MetaTrader requires credentials with the appropriate permission level. Crypto exchanges use API keys with trading enabled and withdrawals disabled.
Connect your receivers. Same process, repeated per account. No limit on brokers or platform mixing.
Choose your sizing method. Balance proportional unless you have a specific reason to use something else.
Set your risk controls. Maximum lot, daily loss limit, instrument filters, trading hours.
Test on demo. Connect a demo receiver before a live one and watch for a week. You will learn more about how your master actually behaves than from any amount of reading, and mistakes cost nothing.
Go live gradually. Start with reduced sizing and increase once you have seen the system handle a full cycle including a losing streak.
Common mistakes
Copying at fixed lot between unequal accounts. The arithmetic above explains why this ends badly.
Skipping the demo phase. The first week reveals how the master behaves, which frequently differs from how it was described.
Copying a scalping strategy across broker types. A strategy built on raw ECN spreads rarely survives being copied onto a wide-spread market maker account.
Ignoring swap costs. A master holding positions overnight at a broker with favourable swaps may show returns you cannot reproduce if yours charges more.
Setting risk controls after the first bad day. The controls exist precisely for the day you did not anticipate.
Supported platforms
The copier connects to:
Cross-platform copying works. A trade opened on MT5 can land on a cTrader account, and a crypto position can mirror across exchanges.
When your source is a Telegram channel
If your signals arrive as messages rather than as positions on an account, our Telegram Signal Copier parses them and executes on the same platforms.
Both tools run from one dashboard with shared risk settings, and many traders use them together: a master account for their own strategy, a Telegram channel for a provider they follow.
Trading financial instruments carries a risk of capital loss. Past performance does not guarantee future results. Copy trading does not remove market risk. Social Trade Hub is software: it does not select signals, hold your funds or trade on your behalf.
Frequently Asked Questions - Trade Copier
Everything you need to know about Trade Copier
Ours does. Social Trade Hub executes server-side, which means there is no terminal to keep open and no virtual private server to rent, configure or reboot. Most expert advisor-based copiers require a VPS because they run inside MetaTrader, and that architecture adds latency while creating a single point of failure. When the VPS restarts after an update, copying stops silently and you find out when positions diverge.
Between 2 and 8 milliseconds on our infrastructure, measured from master execution to receiver execution. Broker-side execution adds its own delay on top, which varies by broker and market conditions. For swing and intraday strategies this is imperceptible. For scalping with targets under 5 pips, the difference between 5 milliseconds and 500 determines whether the strategy remains profitable after copying.
Yes, and most users do. Symbol mapping resolves naming differences automatically, so a trade on EURUSD.m lands correctly on an account using EURUSD. Spreads, swap rates and execution quality differ between brokers, which means receiver results never match the master exactly. That divergence is structural and worth monitoring. It is largest on strategies with small targets and smallest on positions held for days.
The signal is skipped and logged with a reason. Common causes include insufficient margin, an instrument the receiver broker does not offer, a position size below the broker's minimum, or a market closed on one side and open on the other. The execution log identifies which occurred, which matters because each requires a different fix.
Yes. Reverse copying executes the opposite of each incoming position, turning a buy into a sell. Traders use it to hedge an existing exposure or to take the other side of a source they believe underperforms. Treat it carefully: reversing a losing strategy does not automatically produce a winning one, because spreads and swap costs work against you in both directions.
The number of receiver accounts depends on your plan. A single master can feed multiple receivers simultaneously, and you can operate several masters in parallel from the same dashboard with independent settings on each.
Yes. The system tracks changes continuously rather than copying once at entry. When a master moves a stop to breakeven or tightens a take profit, every receiver updates. This matters more than it sounds: a copier replicating only entries leaves receivers carrying original risk while the master sits protected.
Technically yes, but prop firm rules vary considerably and the consequences of breaching them are severe. Copying your own trades between your own accounts is often permitted within a total capital limit. Copying third-party signals or another person's account is frequently prohibited, and some firms ban cloud-based copiers outright. Read your firm's terms before connecting a challenge or funded account.
Other solutions
Ready to replicate your trades?
Join hundreds of traders already using our Trade Copier.







